How to improve the air quality in the bathroom

Air pollution, mold and moisture are all things you don’t want in your home – especially in your bathroom.

Air quality inside the home is often worse than outside, and much of this is due to poor ventilation of the home.

If you suffer from red, itchy eyes when you are at home, you may have poor ventilation. If your bathroom window is always dripping with condensation, the room is probably not ventilated well.

Other signs of this are mold and mildew on bathroom ceilings and walls, and a musty smell from the shower.

Try these pro tips to help improve bathroom air quality.

1. Get a quality fan

A good fan is essential when you want better indoor air quality. If the fan is noisy, no one will want to turn it on.

Also pay attention to whether it is powerful enough to properly ventilate the air.

Tip: Before calling a handyman and complaining about a broken fan, try holding a piece of toilet paper near the fan grill. If the fan does not suck it, then it really needs to be replaced.

2. Dry the bathroom after showering

There are many ways to dry your bathroom. It’s easiest to do this with a mop right after you shower.

A small window for fresh air and a fan is a must. You can also take shorter showers to help reduce mold and mildew as there will be less moisture in the bathroom afterwards.

Tip: If you have low ceilings, avoid placing a fan inside the bathroom. This is to avoid trapping the steam.

3. Install a timer fan

Find a timer fan and set it to run once an hour or according to members’ shower habits to his family.

Tip: If you are in a new construction building, consider adding a remote timer so you can turn on the fan in the middle of the day and evening.

The other option is to have the fan with a sensor so that it runs when needed.

If you have small children or think you might forget to turn on the timer, get a motion sensor fan.

4. Consider underfloor heating

Floor heating, like a timer fan, is a great solution for a dry bathroom. Nothing dries out faience or terracotta faster than good underfloor heating.

Tip: Make sure your heating system is allowed to work inside the bathroom.

5. Ventilated Shower Enclosures

If you choose a shower enclosure, make sure it is well ventilated. Prefer models whose glass panels do not reach all the way to the ceiling of the bathroom.

After use, do not close the door tightly when exiting the shower cabin so as to obtain air circulation.

These cabins can also be equipped with a fan – it is close to the shower and does not allow the glass doors and walls to retain moisture.

6. Pay attention to the joints

If you care about air quality in the bathroom, pay special attention to the joints.

The smaller they are and the less grout used to fill them, the smaller the area that absorbs moisture. This means that it will evaporate faster.

Make sure the slope of the bathroom floor is good enough so that the water drains quickly into the drain.

There should be no unevenness on the floor that could hold water. This way you will avoid the formation of mold.